There are usually some small problems during the use of exhaust fan for soldering station, such as weak suction of exhaust fan for soldering station, abnormal noise, no vacuuming, etc. Today we will talk about the solution to exhaust fan for soldering station not vacuuming. , Exhaust fan for soldering station not vacuuming First find out why exhaust fan for soldering station is not vacuuming, and then troubleshoot.

A big reason the exhaust fan for soldering station doesn't vacuum is clogging. Check the entire suction channel for blockages. The main blocked places include hoses, suction nozzles, dust bag interfaces, dust bags, etc. We should choose to clean them to eliminate the problem of not vacuuming caused by blockage. Usually 70% do not vacuum, as long as the blockage problem here is solved, the problem of exhaust fan for soldering station not vacuuming can be solved. If it is found that the problem is not caused by clogging, you can check whether it is not vacuuming caused by the problem of the components of the exhaust fan for soldering station. First check if the fan is loose, cut off the power supply, shake the fan blade to see if it is loose, or add some oil to make the exhaust fan for soldering station fan blade rotate more smoothly. Secondly, you can check whether the vacuum cleaner of the exhaust fan for soldering station is still close to the ground. If it is found that it has left the ground, it is likely that the vacuuming ability has been reduced because the suction scoop cannot touch the ground. At this time, the position of the suction can be adjusted or the suction can be replaced.

exhaust fan for soldering station https://www.kaisenfilter.com/KSZ-3-0D-Welding-Fume-Extractor.html