With the advancement of technology, our technicians have invented a wide variety of products for everyone's use. These products are widely used in both daily life and industrial production, and the vast majority of them are available. The same is true of stainless steel isolation sleeve magnetic coupling. Then, what should be noted in the application process of stainless steel isolation sleeve magnetic coupling? Now let's go and find out together:

The best operating state is when the tension rod is parallel to the plane on the box body. It can also be applied to a suitable working Angle according to the user's requirements. However, during operation, the tension rod should not be higher than the bright red road markings on the box surface, as this will endanger our work.

2. During the work process, it is only allowed for the tension to increase from small to large, and it is not allowed to decrease from large to small. When the tension needs to be adjusted from the maximum, it is essential to do so in an interrupted state to prevent disconnection. We must keep this in mind.

3. During the application of stainless steel isolation sleeve magnetic coupling, if the tension-pulsating beverage condition is displayed during adjustment, after shutting down, first rotate the left side of the tension-regulating disk to the maximum tension, and then slowly return it to the required tension near the right side for adjustment again. It is not possible to actively terminate the adjustment.

4. After the adjustment is completed and the operation begins, if the working Angle of the tension rod is the same as that of the equipment when it is static, please try to adjust the tension again to prevent abnormal damage to the components of the tensioner and reduce its service life.

stainless steel isolation sleeve magnetic coupling https://www.abm-magnetics.com/Hastelloy-Isolation-Sleeve-Magnetic-Coupling.html